UPVC Replacement Door Handles
Over time, the handles on your doors will get worn out and need to be changed. When replacing them, it is crucial that the new handles conform to the dimensions of the old handle.
The top screw position as well as the lever and keyhole dimensions are the three measurements you have to verify. Use the size guide to assistance in this.
Inline Lever/Lever
A lever handle is a modern door handle designed to suit new or replacement doors. This kind door handle is offered in a variety of styles & finishes. This handle is available from several manufacturers including Avocet ERA Fullex Hoppe Mila Millenco Yale.
Fab and Fix Windsor Inline Sprung Lever Door Handle
The handles made of uPVC/Composite are made from durable materials, and are ideal for multi-point lock doors that require a robust design. The handles are inline and run with the same spindle as well as screw fixings, so they can be easily fitted to new or existing uPVC/Composite doors.
The spring lever design allows the handle to be positioned and angled for comfortable operation and is suitable for all users. The handle has been tested for endurance up to 200 000 cycles. This helps to ensure that the finish is of high quality and performance will last for a long time. The sprung lever can also be reduced to accommodate the widest range of locks. This is particularly useful for doors with narrower openings where the cylinder is further back in the door. A lever that is shorter is an excellent option for doors where the latch could be activated by the thumb turn inside.
Lever Pad
A Lever Pad door handle made of upvc operates differently from lever-type handles found on most doors. These handle types are either operated by one spindle, or two spindles inline or offset. They are typically utilized on UPVC doors with double glazing. They are available in a variety of finishes and variations.
The handles are available in various finishes, including White, Chrome, and Gold. The finish is in line with BS EN 1670:2007 Grade 5 and is also resistant to corrosion, which gives the handle a high degree of durability and performance for its intended use.
All UPVC lever pads for handles come with a spindle, screws, and can be fitted on the uPVC door. The backplate fixation centers of 211mm permit a larger handle, which is usually an advantage when replacing an old or damaged multi-point door lock mechanism. The handle levers are spring-loaded, thereby solving the issue of handles that slide out of the horizontal position when not in use.
It is essential to match the dimensions of the PZ for both the multipoint lock as well as the uPVC doors when choosing a replacement UPVC spindle and handle. This measurement is often referred to as the "handle centre" or "cylinder centres' and is a critical aspect in ensuring that you have the right handles.
Once you have the correct PZ size you will then have to ensure that the handle lever pads and push pads are of a suitable shape to fit the American with Disabilities Act (ADA) approved handles you require for your doors. They are usually a square or round design with an internal lever as well as an external push pad.
The majority of the UPVC Lever Pads that we sell are sprung. This means they return to a horizontal position after not being used instead of hanging, and possibly sticking in the frame. This stops draughts from entering the property. It is also the case that the majority of the UPVC lever pad handles are hand-operated which allows you to place them on either side of the door.
Euro Cylinder
Cylinder locks are found on uPVC and other types of doors. They work by using a key that unlock a cylinder case that is then revealed with pins that can be aligned to those in the lock body and allow them to rotate a revolving cam, thus opening the door. Euro cylinders can be equipped with up to six pins, with external and internal doors usually requiring different levels of security.
The choice of cylinder is vital. It is based on the type of use your doors and handles will receive. For visit our website , doors that are external require an extra secure cylinder, whilst internal doors can be secured with a standard cylinder. In addition, some cylinders come with additional features that increase security, for instance anti-drill or anti-bump features.
A euro cylinder needs to be measured correctly to ensure it is the correct size for your door. The cylinder should be measured from the screw hole at the center to the ends of the cylinder. This includes the thumb turn if there is one. If you are unable to measure using the lock in a fixed position, you can remove it. It is essential to ensure that there is no cylindrical lock that extends beyond the handle or escutcheon. This can make it vulnerable to snapping lock attacks.
The design of most newer cylinders has anti-drilling and bump resistance features. They are designed to minimize attacks by forcing cylinders to turn in a different direction. This helps stop the attack and protect your doors.
There are cylinders designed to resist snapping. This is a more frequent type of attack on cylinders, which is where the break line of the lock is smashed using a special tool to break off the front of the cylinder to allow the door to open. This is much quicker and less difficult than opening the door with multipoint locks and leaves no evidence of a break-in which could hinder the insurance claim.
Spring Cassette
This spring cassette is located in the base plate of the door handle. It is a spring-loaded solution to return the multipoint lock handles to their normal position after using. There was a time when handles of this kind did not have a spring integrated into them, and without it they can droop or drop once the locking mechanism has been disengaged. Adding this simple component is among the most effective ways to fix this issue and is a great way to prevent your upvc doors from getting stuck in the open or closed position, as they aren't always easy to close manually.
These spring cassettes are specially designed for use with multipoint locks sprung They will not work with non-sprung multipoint handles. You will require a hole specifically cut in your backplate to allow these to fit (please see image for technical diagram). These cassettes can be used as a replacement for damaged or missing cassettes on the backplate of uPVC door handles. They are available as a single unit. They come with a square cut out that accommodates an 8mm shaft.
These spring cassettes are a great value solution to the issue of sagging door handles. They are simple to install and will prolong the life span of your uPVC doors. For more information on our wide range of uPVC accessories and spares, please feel free to get in contact with our team. We are on hand to assist and provide expert advice.